Error running a command. (Create a Share)

[b8two]

Hi Phillxnet,

@phillxnet

But 40 MB/s is still a little slow.

From the discussion above I ran through a few tests with what I have and Posted it as a new thread.
I’m happy to gain some feedback if I had done the tests in the wrong way or not.
From what I’m gathering from your comment above and my test that I have linked to below is that USB 2.0 Interface is not suitiable for Rockstor OS Drive.

As for comparison to the tests above, the Sequential Writing test is the best comparison (Difference being the payload being written, 791MB vs 200MB in my tests.);

USB 2.0 Interface Dilemma

Hi All, I’m not sure how useful this is for everyone but I thought I explain some tests I performed regarding the performance of an OLD OCZ Vertex SSD on a USB 2.0 interface. This is not a benchmark of the SSD and this may not provide the same results for everyone. For a Base line, I’m testing with older hardware (similar age to my RockStor box) that has these interfaces; On-board SATA2 (3Gb/s) . On-board USB 2.0 (0.48 GB/s) PCIe USB 3.0 (5Gb/s) I found the mini Tools Partiton Wizard has a…

The decision I made to use the Drive that I had, was before I had read up on all support topics or had gotten use to using Rockstor. I’d make a different decision going ahead now.

@phillxnet

But as long as it’s roughly HDD speed or above you should be OK.

I have concerns as HDD speeds can be very variable also.